Home Where to buy send us your questions






KNOWING WHAT IT IS...WHERE...AND HOW DEEP

The Accumaster is a scientific tool for the detection of treasures, metals,
minerals, cavities, voids, subsurface water etc.
Target determination is accomplished by measuring the total electrical resistance
of the ground between the 4 ground rods, which are injected into the soil on a square or rectangular pattern, and presenting the results on a bar graph as OHM values.

Underground electrical resistance changes with factors like water, metals or caves.
In our latest version with the digital scales display caves, inert ground, water, minerals,
iron and precious metals.
For the detection of a metal target it needs to have a mass of 2kg or more.
Small coins or equal sized targets are not detected.
That feature is specially usefull when search for treasures,
as there is no interference from small and surface trash metal objects.

It is a trully scientific tool used by archaeologists, mining industries,
geologists and treasure hunters.
The most efficient professional equipment requires not any training or experience.
Comes with a 12 Volt 7,2Ah battery and charger inside the case,
and can be used by one operator.
The Accumaster "Carrier wave" signal is transmitted undergound
from 2 rods at a time, in total 6 directions on a square or rectangular form,
like on the examples 1,2,3 & 4 shown below.





ACCUMASTER OHM DISPLAY

Hold a “test switch” for 2 seconds, to determine target location within a 24000 Sq. ft. area!

By popular demand our ACCUMASTER-PRO now in digital version!
With a new 2 scale bar graph indicates accurately voids, water, minerals, iron & precious metals.
The digital readings are bright enough to view in low light conditions, even in the night.
What's more is that with ACCUMASTER-PRO digital, there are no adjustments for the user to worry about, no complex operation, nothing to tune. The ACCUMASTER-PRO is all automatic.
Simply power on and start scanning the underground.
Digital accuracy and simplicity in electronic geophysics for everybody to use.
Press the test switches and start locating targets up to 33 meters depth.



SPECIFICATIONS


• AREA OF DETERMINATION UP TO 24000 SQUARE FEET
• READS DEPTH UP TO 33 METERS
• ACCURATE & SCIENTIFIC WITH DIGITAL DISPLAY
• DOUBLE ILLUMINATED OHM SCALE FOR TARGET ID
• BRIGHT RESPONSE LAMP INDICATES PRECIOUS METALS
• EASY TO USE SMALL AND PORTABLE
• COMES IN WATERTIGHT HEAVY DUTY DOSKOCIL CASE
• PROFESSIONAL EQUIPMENT FOR PROFESSIONAL RESULTS


FEATURES


• IGNORES SMALL (LESS THAN 2 Kg) AND SHALLOW (UP TO 40 cm) OBJECTS
• 4 GROUND RODS AND 4 x 33 m. CABLE SPOOLS
• 2 TEST TARGET DUMMY LOADS FOR IRON AND GOLD
• HAS INTERNAL ELECTRONIC INVERTER FOR 100 Watt SIGNAL POWER
• 12v 7.2Ah BATTERY AND 220v BATTERY CHARGER
• MAXIMUM DEPTH 33M ON LARGE VOIDS - TOMBS
• AUTOMATIC SCIENTIFIC TARGET ID - NO DOWSING
• 2 YEAR GUARANTEE & INSTRUCTIOÍS MANUAL




Find the target location using the digital readings. When the 4 rods are laid just like on the examples below,
gold and silver targets will indicate low OHM values at the Accumaster display, with the bar graph pointing to the “PRECIOUS METALS” mark.
In order to find the treasure depth, follow the method shown at example 4.

Example 1.:
A low (360 ohm) indication represent a copper target


Example 2.:
300 ohm represent gold target




Example 3.:
Find the lowest reading and move towards it until the treasure is located


Example 4.:
When target has been located, get target depth using this pattern





© 2010 Image Locators. Design & specifications subject to change without prior notice.